Part numbers of this type:
TOP-WIFI01 D9*115mm
TOP-WIFI01-1 D9*55MM
TOP-WIFI01-2 D9*58MM/D9*48MM
TOP-WIFI01-3 D9*87MM/ D9*91MM
Introduction:
With Small size, high-quality, quad-band, this type antenna is used more by customers' design. standard SMA terminated, cellular antenna, there are two size 48mm and 58mm including SMA connector. There are different color for client's choose : Black, white, milky white, gray etc.
Please let us know detailed request on connector, size and color before the inquiry and order.
Advantage:
This type indoor WIFI rubber duck antenna with small size, good quality and cheaper price is very popular by the clients
Features:
1. Working Voltage: DC 2.0V - 5.0V
2. Center Frequency:10mA-30mA
3. Output Impednace:50 OHM
4. Outer Band Attenuation:2dBi
5. Noise Figure :≤1.5
6. V.S.W.R ≤1.5
7. Operating Temperature -40°C - +85 °C
Frequency(MHz):2400-2500
VSWR ≤1.5
Gain(dBi):2
Power(W):50
Input Impedance(Ω):50
Antenna Length(mm):48mm/ 58mm
Connector: SMA
1 Electrical Characteristics
Form 1
| No. |
Item |
Specifications |
| 1 |
Frequency(MHz) |
2400~2500 MHz |
| 2 |
V.S.W.R(in BW) |
≤2.0:1 |
| 3 |
Gain(Zenith) |
2 dBi |
| 4 |
Polarization |
Vertical |
| 5 |
Impedance |
50 Ω |
1.2 Mechanical
Form 2
| No. |
Item |
Specification |
| 1 |
Cable |
- |
| 2 |
Connector |
SMA-JW |
| 3 |
Plastic Housing |
White |
2 Environmental Specifications
Post Environmental Tolerance (Refer to the form 1~2 )
Condition: Temperature range 25±3°C
Relative Humidity range 55~75%RH
Operating Temperature range -40°C~+85°C
Storage Temperature range -40°C~+100°C
4.1 Moisture Proof
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40±2°Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.
4.2 Vibration Resist
The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions.
4.3 Drop Shock
The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.
4.4 High Temperature Endurance
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80±5°Cfor 24±2 hours and 1~2 hours recovery time under normal temperature.
4.5 Low Temperature Endurance
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40°C±5°Cfor 24±2 hours and to 2 hours recovery time under normal temperature.
4.6 Temperature Cycle Test
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25°C and high temperature +85°C for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.
WIFI Antennas
-------------------------------------------------------------------------------------------------------------------------------
Our Antenna :
---Powerful R&D team
---Wonderful design solution
---Perfect after-sales service
---Strict quality testing
---Rich cooperation experiences with Communication product manufactures
---Competitive price
FAQ
1. What's the Warranty of the Products?
Answer: In general, all goods with 12 month-warranty after the shipments .
2. How about the defective rate ?
Answer: Less than 1%.
3. Where can customers get the Product Specification and other datasheets?
Answer: we will send them via email once get the request from the customers.
Our high quality products , competitive price and professional service, be sure to meet your need for all kinds of components. ^_^
){kind=link}
){kind=link}